HomepageOMV in New ZealandPermit To Work Checklists

Permit To Work Checklists

The Permit to Work (PTW) system is used at all OMV NZ sites to protect people, assets and the environment when work is carried out. It ensures all safety measures are in place before work starts.

  • Checklist 00 - Toolbox Meetings

Cold Work Checklists

  • Checklist 42 - Test Run Motors and Equipment
  • Checklist 44 - High Voltage (11kV) Electrical Switching
  • Checklist 45 - Work Inside Any Confined Space

Hot Work 1 Checklists

  • Checklist 01 - Hot Work 1 (includes welding, grinding and all other positive ignition sources)
  • Checklist 07 - Operation of Habitats
  • Checklist 09 - Operation of Steam Cleaner

Hot Work 2 Checklists

  • Checklist 16 - Blasting and Painting Including Use of Portable Diesel & IC Engines
  • Checklist 17 - Use of Steel Wire Brushes, Needle Guns, Drills, Impact Wrenches or Saws
  • Checklist 18 - Use of 230V Electrical Equipment in a Hazardous Area
  • Job Hazard Analysis (JHA) Form (master)
  • Job Hazard Analysis (JHA) Form (print friendly)
  • JHA Guidance
  • JHA Example
  • CSE Job Hazard Analysis
  • CSE Rescue Plan Template

Other HSSE documents

  • HSSE Minimum Requirements Low Risk Contracts
  • HSSE Minimum Requirements High-Medium Risk Contracts
  • OMV NZ HSSE Policy